בקר טעינה סולארי, 12 וולט 24 וולט 10 יו אס בי בקרת פוטו וולטאית חכמה עם תצוגת מסך צבעוני, עומס

מאפיינים עיקריים

Item Type:

Solar Charge Controller

System Voltage:

12V 24V automatic adaptation.

Rated Charging Current:

10A

Rated Discharge Current:

10A

Maximum Photovoltaic Voltage:

12V system Float Charging Voltage

Discharge Cut Off Voltage:

10.7V, range

Discharge Recovery Voltage:

12.6V, range

Standby Current:

USB Output

Operating Temperature:

-36~+60℃

Package List:

1 x Solar Charge Controller:

1 x User Manual:

Note:

1. This controller is 12V 24V automatic adaptation. When installing for the first time, please ensure that the battery has enough voltage so that the control can identify the correct battery type. :

2. The controller shall be installed as close to the battery as possible to avoid voltage drop caused by too wire, which will affect normal voltage judgement. :

3. This controller is applicable to various batteries, including openings, sealing, colloids, etc. If you charge other batteries, you must be familiar with their battery characteristics and set appropriate charging parameters. For example, it is forbidden to charge 12V lithium battery, set 9.5V for output protection, 122V for full charge protection, and 11.5V for start up charging when the battery drops. :

4. This controller can only use photovoltaic panels as the charging source, please do not use DC or other power supplies as the charging source. :

5. The controller will generate heat when running. Please pay attention to installing the controller on a flat and well ventilated :