.

.

מודול קלט 3.7 וולט, מודול מטען סוללות, הגנה הפוכה שרף פנולי אספקת חשמל ללא הפרעה לנתבים

מודול קלט 3.7 וולט, מודול מטען סוללות, הגנה הפוכה שרף פנולי אספקת חשמל ללא הפרעה לנתבים

דירוג המבקרים:

ILS 60.60
כמות הסחורה
Това זה נגיש

לטעון את הסוללה כאשר יש כוח, ובאופן אוטומטי להשתמש סוללה כאשר כוח כבוי הסוללה טעונה ופריקה אוטומטית. מתאים עבור נתבים, מתגים, אזעקות, מצלמות וציוד אחר כדי לשמש כגיבוי כוח לאחר הפסקת חשמל. עם קלט הפוך חיבור, התחממות יתר, טעינת יתר, והגנה קצרה, אתה יכול להשתמש עליות מודול בביטחון. יש להשתמש בחוט 20 אינץ 'לפחות לריתוך קלט ופלט, ואורך החוט לא יעלה על 10 סנטימטר/3. לוח הבקרה יפיק חום בעת העבודה, לכן שמור על מרחק מסוים מהסוללה בעת ההתקנה. 100% אחריות שביעות רצון : אנו מתמקדים בצרכי הלקוחות שלנו, במטרה לספק ללקוחות כלי מוצר איכותיים והחוויה הנוחה ביותר. אם יש בעיה עם המוצר, אנא לתקשר איתנו בזמן. מפרט : סוג פריט : אפסחומר : שרף פנולימתח קלט : דק5 וולט-12 וולט (מתח זה הוא המתח בעת טעינת הסוללה)מתח יציאה : ניתן לבחור דק9 וולט או דק12 וולט (ברירת המחדל היא 9 וולט, ניתן גם לשנות את המגשר להגדרת 12 וולט, מתח היציאה הוא המתח בעת שימוש בסוללה בלבד, אם יש כניסת טעינה, הפלט שווה לכניסה)הספק יציאה : 12 וואט מקסימום קיבולת סוללה : 1-3 אה (מקסימום 5 אה)גודל לוח : בערך. 50 איקס 20 איקס 6 מ מ / 2.2 מטרה : מתאים לשימוש כמו אספקת חשמל גיבוי לאחר הפסקת חשמל של נתבים, מתגים, אזעקות, מצלמות וציוד אחררשימת חבילה : 1 איקס אפים מודולהערה : 1.

מאפיינים עיקריים

Item Type:
UPS Module
Material:
Phenolic Resin
Input Voltage:
DC5V-12V (this voltage is the voltage when charging the battery)
Output Voltage:
DC9V or DC12V Can Be Selected (default is 9V, you can also change the jumper to set to 12V, the output voltage is the voltage when only using battery power, if there is a charging input, the output is equal to the input)
Output Power:
12W Maximum
Battery Capacity:
1-3AH (maximum 5AH)
Board Size:
Approx. 50 x 20 x 6mm / 2.0 x 0.8 x 0.2in
Purpose:
 
Suitable for Use As Backup Power Supply After Power Failure of Routers, Switches, Alarms, Cameras and Other Equipment :
Package List:
1 x UPS Module :
1. BAT connection (please connect the battery in the last step, this is very important) battery 3.7V lithium battery or Li‑pol, battery capacity:
1‑3AH ( maximum 5AH )
2. At least 20AWG wire should be used for welding input and output, and the wire length should not exceed 10CM :
3. If the input is connected to the output, a loop will be formed, and the loop will lose 0.4‑0.6mA current :
4. Application description for accessories of charging indicator:
 
Red light‑emitting blue diodes with common anode are used. The blue light indicates whether the battery is loaded; the red light indicates whether the battery is charged, the charging red light is on, and the red light is off when it is fully charged; the red light flashing indicates that the battery is abnormal or not connected. The indicator lights need to be configured by themselves. It is recommended to select the red and blue indicator lights to be effective, and the other color two‑color indicator lights are invalid.  :

מוצרים דומים בקטגוריה