3 שלבים ממסר מצב מוצק DC ל- AC ללא הרעש אנטי זעזוע אמין SSR ממסר מצב מוצק 3-32VDC ל- 24-480VAC

מאפיינים עיקריים

Item Type:

3 Phase Solid State Relay

Material:

High pressure phenolic plastic, brass

Control Voltage:

3-32VDC

Load Voltage:

24-480VAC

Control Current:

≥10MA

Dielectric withstand Voltage:

2000VAC

Through State Voltage Drop:

≤1.5V

Leakage Current:

≤5MA

Conductivity Time:

≤10MS

Ambient Temperature:

-30℃-70℃

Color:

White

How to Use:

Take out the product, install it and use it:

Package List:

1 x 3 Phase Solid State Relay:

1 x Dustproof Cover:

Note:

Solid state relay product selection considerations:

1. When choosing the product, the nature of the load should be different, leaving a different margin in the current grade. (Resistive load, can be selected by 2‑3 times the load current. When inductive or capacitive load, it can be selected by 3‑5 times the load current, and the motor is selected by 5 times or more.):

2. According to the relationship between load current and ambient temperature, when the ambient temperature is higher or the heat dissipation condition is not good. Current capacity should be increased. In order to prevent the load from short circuit when using, it is required to connect the fast circuit breaker switch or fast fuse in series with this product in the load circuit.:

3. In case of inductive load, a voltage sensitive resistor should be connected in parallel with the output to prevent damage to the thyristor in case of overvoltage. The optional varistor (MOV) is 430‑470V for 240V and 680‑750V for 440V.:

4. When installing, the contact surface between the heat sink and the product must be flat and clean, and evenly coated with a layer of heat conductive silicone grease on its surface, and finally the set of flat washers, spring washers and screws are tightened symmetrically to fix.: